Advanced setup
This unit has additional menus that are displayed in the front panel display. The advanced setup menu offers additional operations to adjust and customize the way this unit operates. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening environment.
Notes
•Only AMASTER ON/OFF, NSTRAIGHT and the MPROGRAM selector are effective while you are using the advanced setup menu.
•All the other operations cannot be made while you are using the advanced setup menu.
•The advanced setup menu is only available in the front panel display.
Using the advanced setup menu
1Press AMASTER ON/OFF on the front panel to release it outward to the OFF position to turn off this unit.
2Press and hold NSTRAIGHT and then press AMASTER ON/OFF inward to the ON
position to turn on this unit.
■Remote sensor REMOTE SENSOR
Use this feature to activate or deactivate the signal- receiving capability of the remote control sensor on the front panel of this unit.
Choice | Descriptions |
|
|
ON | Select this setting if you want to activate the |
| |
| sensor. |
|
|
OFF | Select this setting if you want to deactivate the |
| |
| sensor. |
This unit turns on, and “ADVANCED SETUP” appears in the front panel display.
| While holding |
STRAIGHT | down |
EFFECT | MASTER |
|
3Rotate the MPROGRAM selector to select the parameter you want to adjust.
4Press NSTRAIGHT repeatedly to change the selected parameter setting.
Note
We recommend setting the parameter to “ON” in most cases.
■Wake on RS-232C access
RS232C STANDBY
Use this feature to set this unit to transmit data via the RS- 232C interface when this unit is in the standby mode.
Choice | Functions |
|
|
YES | Select this setting to set this unit to transmit data |
| via the |
|
|
NO | Select this setting to set this unit not to transmit |
| data via the |
OPERATION | ADVANCED |
|
|
5Press AMASTER ON/OFF to release it outward to the OFF position to save the new setting and turn off this unit.
y
The settings you made are reflected next time you turn on this unit.
■Speaker impedance SPEAKER IMP.
Use this feature to set the speaker impedance of this unit so that it matches that of your speakers.
Choice | Descriptions |
|
|
8ΩMIN | Select this setting to set the speaker impedance to |
| 8 Ω. The impedance of each speaker must be 8 Ω |
| or higher. |
|
|
6ΩMIN | Select this setting to set the speaker impedance to |
| 6 Ω. The impedance of each speaker must be 6 Ω |
| or higher (front speakers only: 4 Ω or higher). |
|
|
Initial setting:
[U.S.A. and Canada models]: YES
[Other models]: NO
■Remote control ID setting
REMOTE CON AMP
Use this feature to set the remote control ID of this unit for remote control recognition.
Choice | Descriptions |
|
|
ID1 | Select this setting when the ID of the remote |
| control is set to “ID1” |
|
|
ID2 | Select this setting when the ID of the remote |
| control is set to “ID2” |
|
|
Setting remote control ID
Use this feature to set the remote control ID. This feature is useful when you control multiple Yamaha AV receiver or amplifier with using the remote control.
English