Saving and recalling the system settings (System Memory)

Use this feature to save and recall up to six of your favorite setting for the main zone. You can also save up to four of your favorite settings for Zone 2 or Zone 3.

Saving the system settings
Saving by the 7SYSTEM MEMORY
buttons

You can save the system settings stored in “Memory1” to “Memory4” by pressing the corresponding 7SYSTEM MEMORY buttons.

Press and hold one of the 7SYSTEM MEMORY buttons on the remote control for 4 seconds.

“Memory1 SAVE” (example) appears in the front panel display, and then this unit saves the current system setting to the corresponding memory number.

SYSTEM MEMORY

1 2 3 4

4Press 9k / n repeatedly to select the desired zone and then press 9h.

5Press 9k / n repeatedly to select “xxx Save” and then press 9h.

“xxx” indicates the zone you selected in step 4.

6Press 9 k / n repeatedly to select the

desired memory number and then press

9ENTER.

The list of the parameter groups to be saved appears. Available parameter groups vary depending on the selected zone.

Main Save

Input/HDMI Out

Audio

Volume

SAVE

SP Config

CANEL

Video/Display Set

Others

y

If system settings are already stored in the selected memory number, this unit overwrites the old settings.

To save the system settings for Zone 2 or Zone 3, press

HZONE on the remote control repeatedly to select the desired zone and then press and hold one of the 7SYSTEM MEMORY buttons for 4 seconds. To save the system settings for the selected zone, the zone should be turned on.

This unit saves the parameters in the groups you select by using

the GUI menu when you save the parameters by using the

7SYSTEM MEMORY buttons.

Saving by the GUI menu operation

You can save the current system settings stored in “Memory1” to “Memory6” by using the “System Memory” menu in the GUI menu.

1Set the operation mode selector on the remote control to FAMP and then press

IMENU.

y

If the menu directory other than “Top Menu” (page 79) is displayed, press and hold IMENU to display the top GUI menu.

2Press 9k / n repeatedly to select “Setup” and then press 9h.

3Press 9k / n repeatedly to select “System Memory” and then press 9h.

y

If system settings are already stored in the selected memory number, this unit overwrites the old settings.

To load the system settings with the 7SYSTEM MEMORY button operation, use one of “Memory1” to “Memory4”.

7Press 9k / n repeatedly to select the parameter group and then press 9ENTER

to check or uncheck the box.

Check the boxes for the parameter groups to be saved. For details on parameters to be saved, see “Parameters to be saved” (page 102).

8Press 9k / n / l / h repeatedly to select “SAVE” and then press 9ENTER to save

the current system settings to the selected memory number.

y

To cancel the operation, select “CANCEL” and then press

9ENTER.

9Press IMENU to turn off the GUI menu.

OPERATION

ADVANCED

 

 

English

101 En