Troubleshooting
■Automatic setup
Before automatic setup
Error message | Cause | Remedy | See | |
page | ||||
|
|
| ||
Connect MIC! | Optimizer microphone is not connected. | Connect the supplied optimizer microphone | ||
|
| to the OPTIMIZER MIC jack on the front |
| |
|
| panel. |
| |
|
|
|
| |
Unplug Phones! | Headphones are connected. | Unplug the headphones. | — | |
|
|
|
| |
Select Setup Item! | No check items are selected as the | Select the desired check items. | ||
| measurement items. |
|
| |
|
|
|
| |
Memory Guard! | The parameters of this unit are protected. | Set “Memory Guard” to “Off”. | ||
|
|
|
| |
During automatic setup |
|
|
|
Error message | Cause | Remedy | See | |
page | ||||
|
|
| ||
E01:No Front SP | Front L/R channel signals are not detected. | Check the front L/R speaker connections. | ||
|
|
|
| |
E02:No Sur. SP | A surround channel signal is not detected. | Check the surround speaker connections. | ||
|
|
|
| |
E03:No PRNS SP | A presence channel signal is not detected. | Check the presence speaker connections. |
E04:SBR→SBL | Only right surround back channel signal is |
| detected. |
Connect the surround back speaker to the |
SURROUND BACK (SINGLE) speaker terminal if you only have one surround back speaker.
E05:Noisy | Background noise is too loud. |
Perform the automatic setup in a quiet | — |
environment. |
|
|
|
Turn off noisy electric equipment like air | — |
conditioners or move them away from the |
|
optimizer microphone. |
|
E06:Check Sur. | Surround back speakers are connected, | Connect surround speakers when you use | |
| though surround L/R speakers are not. | surround back speakers. |
|
|
|
|
|
E07:No MIC | The optimizer microphone was unplugged | Connect the supplied optimizer microphone | |
| during the “automatic setup” procedure. | to the OPTIMIZER MIC jack on the front |
|
|
| panel. |
|
|
|
|
|
E08:No Signal | The optimizer microphone does not detect | Check the microphone setting. | |
| test tones. |
|
|
| Check the speaker connections and | ||
|
| ||
|
| placement. |
|
|
|
|
|
|
| The optimizer microphone or OPTIMIZER | — |
|
| MIC jack may be defective. Contact the |
|
|
| nearest Yamaha dealer or service center. |
|
|
|
|
|
E09:User Cancel | The “automatic setup” procedure was | Perform the automatic setup again. | |
| cancelled due to user activity. |
|
|
|
|
|
|
E10:Internal Err. | An internal error occurred. | Perform the automatic setup again. | |
|
|
|
|