Zebra Technologies 2207A10L010, 2237A10L010 Media, 5Media, 6Cutter, on page, on page, Media guide, 2Media guide, Printhead-open, Media guide roller, Media supply guide, 3Media guide roller

Print Modes and Options	109
Print Modes

Load Media in Cutter Mode

A cutter is a rotating knife with a self-sharpening blade that is attached to the front of the printer. The cutter is used to cut individual labels as they are printed.

Figure 20 shows the printer loaded with labels in Cutter mode.Figure 20 • Media Loaded in Cutter Mode

1 2 3 4 5

6

1Printhead-open lever

2Media guide

3Media guide roller

4Media supply guide

5Media

6Cutter

Caution • While performing any tasks near an open printhead, remove all rings, watches, hanging necklaces, identification badges, or other metallic objects that could touch the printhead. You are not required to turn off the printer power when working near an open printhead, but Zebra recommends it as a precaution. If you turn off the power, you will lose all temporary settings, such as label formats, and you must reload them before you resume printing.

To set up the printer in Cutter mode, complete these steps:

1.Set the printer to Cutter mode. See Select Print Mode on page 73 for instructions.

2.Insert media into the printer. See Prepare the Media for Loading on page 40 for instructions.

9/6/07 XiIIIPlus/R110Xi/R170Xi User Guide 13383L-004 Rev. A