Zebra Technologies 2207A10L010, 2237A10L010 manual 125

Print Modes and Options	125
Print Modes

11.If you are using a core, slide it onto the rewind spindle until it is flush against the guide plate.

Note • A core is not required.

12.Wind the media liner counterclockwise around the rewind spindle.

13.Reinstall the hook. Insert the short end of the hook into the hole in the center of the adjusting nut (1). Insert the long end of the hook into the small hole on the guide plate (2).

2

1

14.Rotate the spindle counterclockwise several turns to wind the media liner over the hook and remove any slack.

9/6/07 XiIIIPlus/R110Xi/R170Xi User Guide 13383L-004 Rev. A