Zebra Technologies 2207A10L010, 2237A10L010 thickness, (76 mm) core, Interlabel gap, Total thickness, Total media width, Minimum label length, (label + backing, if any), Maximum roll diameter on 3 in

Specifications 205

Media Specifications

Media Specifications

Use the correct size and type of labels for best performance. Refer to the tables that follow for specifications.

Important • Media registration and minimum label length are affected by label type and width, ribbon type, print speed, and printer mode of operation. Performance improves as these factors are optimized. Zebra recommends qualifying any application with thorough testing.

110XiIIIPlus and R110Xi Printers

110

Media Specifications		110XiIIIPlus/	110XiIIIPlus/	110XiIIIPlus
		R110Xi 200 dpi	R110Xi 300 dpi	600 dpi
Minimum label length	Tear-Off	0.7 in.* (18 mm*)	0.7 in.* (18 mm*)	0.7 in. (18 mm)
	Peel-Off	0.5 in.* (13 mm*)	0.5 in.* (13 mm*)	0.5 in. (13 mm)
	Cutter	1.5 in.* (38 mm*)	1.5 in.* (38 mm*)	1.5 in. (38 mm)
	Rewind	0.25 in.* (6 mm*)	0.25 in.* (6 mm*)	0.25 in. (6 mm)
	RFID labels	**	**	N/A
Total media width	Minimum	0.79 in.* (20 mm*)	0.79 in.* (20 mm*)	0.79 in. (20 mm)
(label + backing, if any)
	Maximum	4.5 in.* (114 mm*)	4.5 in.* (114 mm*)	4.5 in. (114 mm)
	RFID labels	**	**	N/A
Total thickness		0.003 in. (0.076 mm)	0.003 in. (0.076 mm)	0.003 in. (0.076 mm)
(includes backing, if any)
		0.012 in. (0.305 mm)	0.012 in. (0.305 mm)	0.012 in. (0.305 mm)
Cutter maximum full-width media		0.009 in. (0.23 mm)	0.009 in. (0.23 mm)	0.009 in. (0.23 mm)
thickness
Roll media core inside diameter		3 in. (76 mm)	3 in. (76 mm)	3 in. (76 mm)
Maximum roll diameter on 3 in.		8.0 in. (203 mm)	8.0 in. (203 mm)	8.0 in. (203 mm)
(76 mm) core
Interlabel gap	Minimum	0.079 in.* (2 mm*)	0.079 in.* (2 mm*)	0.079 in. (2 mm)
	Preferred	0.118 in.* (3 mm*)	0.118 in.* (3 mm*)	0.118 in. (3 mm)
	Maximum	No more than the	No more than the	No more than the
		calibrated length of	calibrated length of	calibrated length of
		the label.	the label.	the label.
	RFID labels	**	**	N/A
Maximum internal fanfold media		8.0×4.5×4.5 in.	8.0×4.5×4.5 in.	8.0×4.5×4.5 in.
pack size (label + backing): L × W×H		(203×114×114 mm)	(203×114×114 mm)	(203×114×114 mm)
Ticket/tag sensing notch: L × W		0.12×0.25 in.	0.12×0.25 in.	0.12×0.25 in.
		(3×6 mm)	(3×6 mm)	(3×6 mm)

*Does not apply to RFID labels.

**This parameter varies for each transponder type.

9/6/07 XiIIIPlus/R110Xi/R170Xi User Guide 13383L-004 Rev. A