Zebra Technologies 2207A10L010, 2237A10L010 Off, Off, Off, Off, Off, Off, Off, TAKE, DATA, Table, Light, POWER, LABEL, ERROR, CHECK, PAUSE, Status, RIBBON, loaded, Flashing, Flashing, received

Introduction 23

Control Panel

Control Panel Indicator Lights

Table 2 describes lights on the control panel that indicate different printer conditions.

Note • If two operating conditions occur simultaneously (for example, one that causes a light to be on constantly and one that causes the same light to flash), the indicator light flashes.

Table 2 • Control Panel Indicator Lights

Light	Appearance	Status	Indication
POWER		Off	The printer is off or power is not applied.
		On	The printer is on.
TAKE		Off	Normal operation.
LABEL
		Flashing	(Peel mode only.) The label is available. Printing pauses
			until the label is removed.
ERROR		Off	Normal operation—no printer errors.
		Flashing	A printer error exists. Check the LCD for more information.
CHECK		Off	Normal operation—ribbon (if used) is properly loaded.
RIBBON
		On	Printing is paused, the LCD displays a warning message,
			and the PAUSE light is on.
			• If the printer is in Direct Thermal Mode: ribbon is loaded.
			• If the printer is in Thermal Transfer Mode: no ribbon is
			loaded.
PAPER OUT		Off	Normal operation—media is properly loaded.
		On	No media is under the media sensor. Printing is paused, the
			LCD shows an error message, and the PAUSE light is on.
PAUSE		Off	Normal operation.
		On	The printer stopped all printing operations. Causes include:
			• PAUSE was pressed
			• A label format included a pause command
			• The online verifier detected an error
			• A printer error was detected.
			The LCD gives additional information.
DATA		Off	Normal operation. No data being received or processed.
		On	The printer is processing data or is printing. No data is being
			received.
		Flashing	The printer is receiving data from or sending status
			information to the host computer.

9/6/07 XiIIIPlus/R110Xi/R170Xi User Guide 13383L-004 Rev. A