Configuration 67

Setup Mode

Exit Setup Mode

To leave Setup mode, complete these steps:

1.Press SETUP/EXIT.

The LCD displays SAVE CHANGES.

2.Press the left or right oval to display the save options:

LCD

Description

 

 

PERMANENT

Stores values in the printer even when power is turned off.

 

 

TEMPORARY

Saves the changes until power is turned off.

 

 

CANCEL

Cancels all changes made since you entered Setup mode,

 

except for changes made to the darkness and tear-off settings,

 

which go into effect as soon as they are made.

 

 

LOAD DEFAULTS

Restores all parameters other than the network settings back to

 

the factory defaults. Use care when loading defaults because

 

you will need to reload all settings that you changed manually.

 

Note • Loading factory defaults causes the printer to

 

auto-calibrate.

 

 

LOAD LAST SAVE

Loads values from the last permanent save.

 

 

DEFAULT NET

Restores the wired and wireless network settings back to

 

factory defaults.

 

 

3.Press NEXT/SAVE to select the displayed choice.

When the configuration and calibration sequence is done, PRINTER READY displays.

9/6/07

XiIIIPlus/R110Xi/R170Xi User Guide

13383L-004 Rev. A