Configuration

 

97

 

 

 

 

 

 

 

 

 

 

 

 

 

Control Panel Parameters

 

 

 

 

 

 

 

Table 10 • Printer Parameters (Sheet 26 of 27)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Parameter

 

 

Action/Explanation

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Adjust LCD Display

 

 

 

 

LCD ADJUST+10

 

 

 

 

 

 

This parameter allows you to adjust the brightness of your LCD if it is

 

 

 

-

 

 

 

+

difficult to read.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Default: 10

 

 

 

 

 

 

 

 

Range: 00 to 19

 

 

 

 

 

 

 

 

To change the value shown:

 

 

 

 

 

 

 

 

1. Press the right oval to increase the value (increase brightness).

 

 

 

 

 

 

 

 

2. Press the left oval to decrease the value (reduce brightness).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Select Format Convert

 

 

 

FORMAT CONVERT

 

 

 

 

 

Selects the bitmap scaling factor. The first number is the original dots per

 

 

 

-

 

NONE

 

+

 

 

 

 

 

inch (dpi) value; the second, the dpi to which you would like to scale.

 

 

 

 

 

 

 

 

Default: NONE

 

 

 

 

 

 

 

 

Selections: NONE, 150 → 300, 150 → 600, 200 → 600, 300 → 600

 

 

 

 

 

 

 

 

To change the value shown:

 

 

 

 

 

 

 

 

1. Press the left or right oval to scroll through the options.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Select Idle Display

 

 

 

 

IDLE DISPLAY

 

 

 

 

 

 

 

+

This parameter selects the LCD options for the real-time clock.

 

 

 

- FW VERSION

 

Note • If the default value is not selected, pressing the left or right

 

 

 

 

 

 

 

 

oval briefly displays the firmware version of the printer.

 

 

 

 

 

 

 

 

Default: FIRMWARE VERSION

 

 

 

 

 

 

 

 

Selections: MM/DD/YY (24 HOUR), MM/DD/YY (12 HOUR),

 

 

 

 

 

 

 

 

DD/MM/YY (24 HOUR), DD/MM/YY (12 HOUR), FW VERSION

 

 

 

 

 

 

 

 

To change the value shown:

 

 

 

 

 

 

 

 

1. Press the left or right oval to scroll through the options.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Set Real-Time Clock (RTC) Date

 

 

 

 

RTC DATE

 

 

 

 

 

 

 

 

This parameter allows you to set the date following the convention selected

 

 

 

-

01/31/01

 

+

 

 

 

 

in IDLE DISPLAY.

 

 

To change the value shown:

1.Press the left oval to move to the next digit position.

2.Press the right oval to change the value of the digit.

9/6/07

XiIIIPlus/R110Xi/R170Xi User Guide

13383L-004 Rev. A