80Configuration

Control Panel Parameters

 

 

 

Table 10 • Printer Parameters (Sheet 9 of 27)

 

 

 

 

 

 

 

 

Parameter

 

 

Action/Explanation

 

 

 

 

 

 

 

 

 

 

 

Set Printhead Life for Early Warning

 

HEAD LIFE

 

 

 

 

 

This parameter appears only when Early Warning for Maintenance is

 

-

1000000 IN

+

 

 

 

enabled. Set this value to the number of inches of media that the printhead

 

 

 

 

 

 

 

 

 

 

is expected to print.

 

 

 

 

 

Default: 1,000,000 inches

 

 

 

 

 

Range: 100 to 1,000,000 inches

 

 

 

 

 

To change the value shown:

 

 

 

 

 

1. Press the left oval to move the cursor.

 

 

 

 

 

2. Press the right oval to increase the value of the digit.

 

 

 

 

 

When the printhead reaches the set length, WARNING REPLACE

 

 

 

 

 

HEAD appears on the LCD. If the alert function is enabled, the printer

 

 

 

 

 

generates an alert. When the printhead is opened and then closed after

 

 

 

 

 

a printhead life warning is received, the LCD prompts with NEW

 

 

 

 

 

PRINTHEAD?.

 

 

 

 

 

3. If you replaced the printhead, press the right oval to select YES to clear

 

 

 

 

 

the warning and reset the printhead life counter. If you did not replace

 

 

 

 

 

the printhead, press the left oval to select NO.

 

 

 

 

 

 

 

 

 

 

 

Reset Printhead Life Counter for Early Warning

 

NEW PRINTHEAD?

 

 

 

 

 

This parameter appears only when Early Warning for Maintenance is

 

NO

YES

 

 

 

 

 

enabled.

 

 

 

 

 

 

 

 

 

 

To reset the printhead life counter:

 

 

 

 

 

1. Did you replace the printhead?

 

 

 

 

 

a. If you replaced the printhead, press the right oval to select YES.

 

 

 

 

 

b. If you did not replace the printhead, press the left oval to select

 

 

 

 

 

NO.

 

 

 

 

 

 

 

 

 

 

 

List Fonts

 

LIST FONTS

 

 

 

 

 

This option prints a label that lists the available fonts in the printer,

 

 

PRINT

 

 

including standard printer fonts plus any optional fonts. Fonts may be

 

 

 

 

 

stored in RAM, Flash memory, optional PCMCIA font cards, or

 

 

 

 

 

CompactFlash® cards.

 

 

 

 

 

To print a list of the available fonts:

 

 

 

 

 

1. Press the right oval to select PRINT.

 

 

 

 

 

 

 

 

 

 

 

List Bar Codes

 

LIST BAR CODES

 

 

 

 

 

This option prints a label that lists the available bar codes in the printer. Bar

 

 

PRINT

 

 

 

 

 

 

codes may be stored in RAM, Flash memory, optional PCMCIA cards, or

 

 

 

 

 

 

 

 

 

 

Compact Flash cards.

 

 

 

 

 

To print a list of the available bar codes:

 

 

 

 

 

1. Press the right oval to select PRINT.

 

 

 

 

 

 

 

 

 

 

 

 

13383L-004 Rev. A

XiIIIPlus/R110Xi/R170Xi User Guide

9/6/07