Zebra Technologies 2207A10L010, 2237A10L010 2.Remove the media and ribbon (if loaded), Open the printhead assembly by rotating the, To clean the printhead and platen roller, complete these steps:

Routine Maintenance	135
Cleaning Schedule and Procedures

Caution • The printhead may be hot and can cause severe burns. Allow the printhead to cool.

Caution • Before touching the printhead assembly, discharge any built-up static electricity by touching the metal printer frame or by using an anti-static wriststrap and mat.

Caution • While performing any tasks near an open printhead, remove all rings, watches, hanging necklaces, identification badges, or other metallic objects that could touch the printhead. You are not required to turn off the printer power when working near an open printhead, but Zebra recommends it as a precaution. If you turn off the power, you will lose all temporary settings, such as label formats, and you must reload them before you resume printing.

To clean the printhead and platen roller, complete these steps:

1.Open the printhead assembly by rotating the printhead-open lever (1) counter-clockwise.

1

2.Remove the media and ribbon (if loaded).

9/6/07 XiIIIPlus/R110Xi/R170Xi User Guide 13383L-004 Rev. A