Zebra Technologies 2207A10L010, 2237A10L010 Pause mode, Setup mode, Error mode, Operating mode, Table 1 • Control Panel Buttons

Introduction 21

Control Panel

Control Panel LCD

The control panel LCD functions differently in different printer modes.

•In Operating mode, the LCD displays the printer’s status, sometimes in conjunction with a control panel light (see Control Panel Indicator Lights on page 23).

•In Pause mode, the printer stops printing temporarily.

•In Setup mode, you can use the control panel LCD to view or modify printer parameters (see Control Panel Parameters on page 71).

•In Error mode, the LCD may display an alert or error message (see LCD Error Messages on page 147).

Control Panel Buttons

	Table 1 describes the function of each button.
		Table 1 • Control Panel Buttons
Button	Appearance	Function
PAUSE		Stops and restarts the printing process or removes error messages and
		clears the LCD.
		• If the printer is idle, it enters Pause mode immediately.
		• If the printer is printing, the label is completed before the printer pauses.
FEED		Advances a blank label.
		• If the printer is idle or paused, the label is fed immediately.
		• If the printer is printing, the label is fed after printing finishes.
CANCEL		CANCEL functions only in Pause mode. Pressing CANCEL once has these
		effects:
		• Cancels the label format that is currently printing.
		• If no label format is printing, the next one to be printed is canceled.
		• If no label formats are waiting to be printed, CANCEL is ignored.
		To clear the printer’s entire label format memory, press and hold CANCEL.
		When the formats are cleared, the DATA light turns off.
CALIBRATE		Calibrates the printer for the following:
		• Media length
		• Media type (continuous or non-continuous)
		• Print mode (direct thermal or thermal transfer)
		• Sensor values
		For more information on calibration, see Calibrate the Printer on page 56.
SETUP/EXIT		Enters and exits Setup mode.

9/6/07 XiIIIPlus/R110Xi/R170Xi User Guide 13383L-004 Rev. A