78Configuration

Control Panel Parameters

 

 

 

Table 10 • Printer Parameters (Sheet 7 of 27)

 

 

 

 

 

 

 

Parameter

 

 

 

Action/Explanation

 

 

 

 

 

 

 

 

 

 

 

Reset Media Counter for Early Warning

 

MEDIA REPLACED?

 

 

 

 

 

This parameter appears only when Early Warning for Media is enabled.

 

NO

YES

 

 

 

 

 

To reset the media counter:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1. Did you replace the media?

 

 

 

 

 

a. If you replaced the media, press the right oval to select YES.

 

 

 

 

 

b. If you did not replace the media, press the left oval to select NO.

 

 

 

 

 

 

 

 

 

 

 

Set Ribbon Length for Early Warning

 

RIBBON LENGTH

 

 

 

 

 

 

 

This parameter appears only when Early Warning for Media is enabled and

 

- 450M 1476 FT

+

 

 

 

 

 

the printer is set for Thermal Transfer operation.

 

 

 

 

 

 

 

 

 

 

Default: 450 M/1476 FT

 

 

 

 

 

Range: 100 M/328 FT to 450 M/1476 FT in 50 M increments

 

 

 

 

 

To change the value shown:

 

 

 

 

 

1. Press the left or right oval to set the value to match the length of the

 

 

 

 

 

ribbon that you are using.

 

 

 

 

 

Based on the number entered, when the printer detects that less than

 

 

 

 

 

15% of the ribbon remains, WARNING RIBBON LOW appears on the

 

 

 

 

 

LCD. If the alert function is enabled, the printer generates an alert.

 

 

 

 

 

When the printhead is opened and then closed after a ribbon warning is

 

 

 

 

 

received, the LCD prompts with RIBBON REPLACED?.

 

 

 

 

 

 

 

 

 

 

 

Reset Ribbon Counter for Early Warning

 

RIBBON REPLACED?

 

 

 

 

 

This parameter appears only when Early Warning for Media is enabled and

 

NO

YES

 

 

 

 

 

the printer is set for Thermal Transfer operation.

 

 

 

 

 

 

 

 

 

 

To reset the ribbon counter:

 

 

 

 

 

1. Did you replace the ribbon?

 

 

 

 

 

a. If you replaced the ribbon, press the right oval to select YES.

 

 

 

 

 

b. If you did not replace the ribbon, press the left oval to select NO.

 

 

 

 

 

 

13383L-004 Rev. A

XiIIIPlus/R110Xi/R170Xi User Guide

9/6/07