![](/images/new-backgrounds/1298787/298787295x1.webp)
Frequently Asked Questions
FAQs
Question | Answer | |
|
| |
Will the ZebraNet PSII allow | Yes. | |
connectivity to anything other | The ZebraNet PSII allows connectivity to | |
than a PC network? | ||
systems such as IBM’s AS400, provided that | ||
| ||
| it is configured using TCP/IP. Other network | |
| protocols can be used with third party | |
| adapters that are converted to | |
|
| |
Will the ZebraNet PSII option | No. | |
work on a | The ZebraNet PSII option is a | |
network? | print server. This means that the data cannot | |
| ||
| travel any faster than 10 megabits per second. | |
| The ZebraNet PSII can be deployed on a | |
| network that is utilizing 10/100 hubs, but the | |
| ZebraNet PSII operates only at 10 megabits | |
| per second. | |
|
| |
What if a print job makes it to | These are the things to check: | |
the queue, but never leaves the | • Confirm that the printer is turned on and | |
queue? The label does not print. | ||
receiving power. | ||
| ||
| • Confirm that the network cable is plugged | |
| in and that you can ping the printer. | |
| If the above bullets do not change the | |
| outcome, it is likely that there was a | |
| misconfiguration while creating the queue. | |
| The queue must be recreated verifying the | |
| following: | |
| • Confirm that you use the print servers valid | |
| IP address. | |
| • If you are using a UNIX or AS/400 host, | |
| there is an option for the remote queue name. | |
| There is only one valid response to use: | |
| PORTLF1. | |
| • If Windows does not have LPR installed | |
| the above required option should be left | |
| blank. | |
| • See the documentation for other operating | |
| system specific queue creation. | |
|
|
PrintServer II User and Reference Guide | 137 |