Getting Started
Assigning an IP Address
Gleaning: To use this method, complete these steps:
A method where the print server uses the IP Address of the first ping packet that is sent to its Hardware Address.
1.Add an entry to the ARP table that assigns an IP address to an Ethernet (Hardware) address.
The syntax for this command is: arp
Example • You would type: arp
2.Power cycle the printer.
3.As the printer reboots, begin a continuous ping to the address assigned previously.
Note • Most UNIX systems use a continuous ping.
To use a continuous ping from a Windows host you must issue the command: ping
4.When the PSII begins to respond, stop the ping activity. In Windows, Ctrl + C, halts the pinging.
5.Telnet to the PSII and assign the appropriate IP address, subnet mask and gateway if applicable.
6.Once this is complete, reset the PSII.
PrintServer II User and Reference Guide | 43 |
