C: CardSense
Installing the CardSense Single-Card Feed Kit
Step 1. Turn printer power OFF.
Step 2. Open the lid, and remove the ribbon cartridge.
Important • Make sure the Card Output Hopper remains closed.
Step 3. Install the black roller. Place it between the blue clips just behind the card entry slot, and press the roller straight down so it is fully seated.
Step 4. While holding the roller down, turn power ON. You will hear a loud click as the clips secure the roller.
Step 5. At this point, let go of the roller, and then turn printer power OFF.
Step 6. Open the Cleaning Cartridge. The new Cleaning Cartridge will contain a Cleaning Roller with its protective wrapping.
New Cleaning
Roller with
Protective
Wrapping
106 | Zebra ZXP Series 1 Card Printer User’s Manual |
