3: Printer Setup
Loading Cards
3.Slide the card guide all the way to the right until it locks in place with an audible click.
Caution • Hold the cards by the edges only. DO NOT touch print surfaces as this can reduce print quality.
4.Remove the wrapper from the card stack.
5.Examine the cards, and discard any cards with damaged edges.
6.Holding the card stack by its sides, fan the cards (like flexing a deck of playing cards) at least once from each end, so as to separate all the cards.
7.Restore the card stack to its original
8.Place the stack of cards into the card feeder.
9.Close the card feeder cover. When card feeder cover is closed, the card guide locking mechanism will be released automatically.
Zebra ZXP Series 1 Card Printer User’s Manual | 35 |
