Zebra Technologies zebra zxp series 1 Encoder Settings Driver, Media Loading Orientation

B: Magnetic Encoder Option

Encoder Settings (Driver)

The Encoder Settings dialog box is used for setting various Magnetic Encoder parameters. This feature is not enabled if the printer does not have the magnetic encoder option.; see Encoding Tab on page 65 for details.

Media Loading Orientation

Caution • ONLY USE cards that comply with ISO 7810 & 7811 standards for magnetic stripe cards. The magnetic stripe must be flush to the surface of the card to work properly. Never use cards which have taped-on magnetic stripes.

Note • Zebra-approved HiCo & LoCo PVC cards are available; see http://www.zebra.com/ supplies for details.

When loading cards with magnetic stripes into the card feeder, please ensure that the magnetic stripe is facing the left side of the printer, and closest to the bottom edge of the card feeder; see Loading Cards on page 34 for details.

Magnetic Encoder Cleaning

Use the standard cleaning card process as described in Section 5, Cleaning. This cleans the most important parts of the printer; including the Printhead, Transport Roller, and Magnetic Stripe Encoder.

102 Zebra ZXP Series 1 Card Printer User’s Manual P1060728-002