Printer Configuration and Adjustment 107

Remove Used Ribbon

Remove Used Ribbon

Remove used ribbon from the ribbon take-up spindle each time you change the roll of ribbon.

To remove used ribbon, complete these steps:

1.Has the ribbon run out?

If the ribbon...

Then

 

 

Ran out

Continue with the next step.

 

 

Did not run out

a. Cut or break the ribbon before the ribbon take-up

 

spindle.

b.Continue with the next step.

2.Slide the core with the used ribbon off of the ribbon take-up spindle.

3.Discard the used ribbon. You may reuse the empty core from the ribbon supply spindle by moving it to the ribbon take-up spindle.

4.Reload the ribbon following the instructions in Load the Ribbon on page 55.

8/22/12

P1048261-004