84Printer Configuration and Adjustment Changing Printer Settings
Table 8 • Calibration and Diagnostic Tools (Continued)
LCD Contrast | Change the contrast on the printer’s display. (ZT230 only) | ||
|
|
| |
| Accepted values: | 3 to 15 | |
|
|
| |
| Related ZPL command(s): | none | |
|
|
| |
| SGD command used: | display.contrast | |
|
|
| |
| Control panel menu item: | ||
|
|
| |
| Printer web page: | N/A | |
|
|
| |
Idle Display | Select the information shown on the printer’s display when the printer is idle. | ||
| (ZT230 only) |
|
|
|
|
|
|
| Accepted values: | • | FW VERSION |
|
| • | IP ADDRESS |
|
| • | MM/DD/YY 24 HR |
|
| • | M/DD/YY 12 HR |
|
| • | DD/MM/YY 24 HR |
|
| • | DD/MM/YY 12 HR |
|
|
| |
| Related ZPL command(s): | none | |
|
|
| |
| SGD command used: | device.idle_display_format | |
|
|
| |
| Control panel menu item: | ||
|
|
| |
| Printer web page: | N/A | |
|
|
|
|
Set the |
|
| |
Set the action for the printer to take during the
•CALIBRATE adjusts sensor levels and thresholds, determines the label length, and feeds the media to the next web.
•
•LENGTH determines the label length using current sensor values, and feeds the media to the next web.
•NO MOTION tells the printer not to move the media. You must manually ensure that the web is positioned correctly, or press feed to position the next web.
•SHORT CAL sets the media and web thresholds without adjusting sensor gain, determines the label length, and feeds the media to the next web.
| Accepted values: | • | CALIBRATE |
|
| • | FEED |
|
| • | LENGTH |
|
| • | NO MOTION |
|
| • | SHORT CAL |
|
|
| |
| Related ZPL command(s): | ^MF | |
|
|
| |
| SGD command used: | ezpl.power_up_action | |
|
|
| |
| Control panel menu item: | ||
|
|
| |
| Printer web page: | View and Modify Printer Settings > Calibration | |
|
|
|
|
8/22/12 |