Routine Maintenance 111

Cleaning Schedule and Procedures

Clean the Exterior, the Media Compartment, and the Sensors

Over time, dust, grime, and other debris may build up on the outside and inside of your printer, particularly in a harsh operating environment.

Printer Exterior

You may clean the exterior surfaces of the printer with a lint-free cloth and a small amount of a mild detergent, if necessary. Do not use harsh or abrasive cleaning agents or solvents.

Important • Zebra is not responsible for damage caused by the use of cleaning fluids on this printer.

Media Compartment and Sensors

To clean the sensors, complete these steps:

1.Brush, air blow, or vacuum any accumulated paper lint and dust away from the media and ribbon paths.

2.Brush, air blow, or vacuum any accumulated paper lint and dust away from the sensors (1).

1

8/22/12

P1048261-004