Zebra Technologies ZT210, ZT220, ZT230 SETTINGS Menu (continued)

Introduction 21

ZT230 Printer Control Panel Display

SETTINGS Menu (continued)

Items in this menu are shown in the order in which they appear when you press the RIGHT ARROW. For more information about these settings, see Table 7, Print Settings on page 79.

▼	TEAR OFF	▲
	0
▼	PRINT WIDTH	▲
	0000
▼	PRINT MODE	▲
	TEAR OFF
▼	LEFT POSITION	▲
	0000

Adjust the Tear-Off Position

If necessary, adjust the position of the media over the tear-off bar after printing.

See Tear-Off Position on page 80 for more information.

Adjust the Print Width

Specify the width of the labels being used. The default value is the maximum width for the printer, based on the printhead’s DPI value.

See Print Width on page 81 for more information.

Select the Print Mode

Select a print mode that is compatible with your printer options. See Print Mode on page 81 for more information.

Adjust the Label Left Position

If necessary, shift the print position horizontally on the label. Positive numbers move the left edge of the image toward the center of the label by the number of dots selected, while negative numbers move the left edge of the image toward the left edge of the label.

See Label Left Position on page 81 for more information.

8/22/12 P1048261-004