28Introduction

ZT230 Printer Control Panel Display

NETWORK Menu

Items in this menu are shown in the order in which they appear when you press the RIGHT ARROW. For more information about these settings, see Table 9, Network Settings

on page 89.

NO PRINT SERVER

INSTALLED

IP ADDRESS

000.000.000.000

NEXT

SUBNET MASK

000.000.000.000

NEXT

GATEWAY

000.000.000.000

NEXT

No Print Server Message*

*If no print server is installed, this message displays in place of the print server menu items.

Set the Printer’s IP Address*

View and, if necessary, change the printer’s IP address.

Changes are saved only if IP PROTOCOL on page 29 is set to PERMANENT. To allow any saved changes to take effect, use RESET NETWORK on page 30 to reset the print server.

See IP Address on page 89 for more information.

*This menu item appears only if a wired or wireless print server is installed in your printer.

Set the Subnet Mask*

View and, if necessary, change the subnet mask.

Changes are saved only if IP PROTOCOL on page 29 is set to PERMANENT. To allow any saved changes to take effect, use RESET NETWORK on page 30 to reset the print server.

See Subnet Mask on page 89 for more information.

*This menu item appears only if a wired or wireless print server is installed in your printer.

Set the Default Gateway*

View and, if necessary, change the default gateway.

Changes are saved only if IP PROTOCOL on page 29 is set to PERMANENT. To allow any saved changes to take effect, use RESET NETWORK on page 30 to reset the print server.

See Gateway on page 89 for more information.

*This menu item appears only if a wired or wireless print server is installed in your printer.

P1048261-004

8/22/12