Printer Setup 67

Load the Media

9.Rotate the printhead-open lever clockwise until it locks the printhead in place.

10.Set the printer to Tear-Off mode (for more information, see Print Mode on page 81).

11.Close the media door.

12.Press PAUSE to exit pause mode and enable printing.

The printer may perform a label calibration or feed a label, depending on your settings.

13.If desired, perform the CANCEL Self Test on page 142 to verify that your printer is able to print.

Media loading in Tear-Off mode is complete.

8/22/12

P1048261-004