Printer Configuration and Adjustment 83

Changing Printer Settings

Calibration and Diagnostic Tools

Table 8 • Calibration and Diagnostic Tools

Print Information

Print the specified information on one or more labels.

Accepted values:

• SETTINGS—prints the printer configuration

 

label.

 

• NETWORK—prints the settings for any print

 

server that is installed.

 

• FORMATS—prints the available formats stored

 

in the printer’s RAM, Flash memory, or optional

 

memory card.

 

• IMAGES—prints the available images stored in

 

the printer’s RAM, Flash memory, or optional

 

memory card.

 

• FONTS—prints the available fonts in the printer,

 

including standard printer fonts plus any optional

 

fonts. Fonts may be stored in RAM or Flash

 

memory.

 

• BARCODES—prints the available bar codes in

 

the printer. Bar codes may be stored in RAM or

 

Flash memory.

 

• ALL—prints the previous six labels.

 

• SENSOR PROFILE—shows the sensor settings

 

compared to actual sensor readings. To interpret

 

the results of the sensor profile, see Sensor Profile

 

on page 149.

 

 

Related ZPL command(s):

Settings: ~WC

 

Network: ~WL

 

Sensor profile: ~JG

 

Others: ^WD

 

 

SGD command used:

none

 

 

Control panel menu item:

Settings: PRINT INFORMATION on page 24

 

Network: PRINT INFORMATION on page 30

 

Sensor profile: PRINT INFORMATION on page 34

 

 

Control panel key(s):

Settings and Network: Do one of the following:

 

• Hold CANCEL during printer power-up.

 

• Hold FEED + CANCEL for 2 seconds when

 

the printer is in the Ready state.

 

Sensor profile: Hold FEED + CANCEL during

 

printer power-up.

 

 

Printer web page:

View and Modify Printer Settings >

 

Print Listings on Label

 

 

8/22/12

P1048261-004