Troubleshooting 147
Printer Diagnostics
FEED + PAUSE Self Test
Performing this self test resets the printer configuration to the factory default values. Perform a sensor calibration after this self test. (See Calibrate the Ribbon and Media Sensors
To perform a FEED and PAUSE self test, complete these steps:
1.Turn off (O) the printer.
2.Press and hold FEED + PAUSE while turning on (I) the printer.
3.Hold FEED + PAUSE until the first control panel light turns off.
The printer configuration is reset to the factory default values. No labels print at the end of this test.
CANCEL + PAUSE Self Test
Performing this self test resets the network configuration to the factory default values.
To perform a CANCEL and PAUSE self test, complete these steps:
1.Turn off (O) the printer.
2.Press and hold CANCEL + PAUSE while turning on (I) the printer.
3.Hold CANCEL + PAUSE until the first control panel light turns off.
The printer’s network configuration is reset to the factory default values. No labels print at the end of this test.
8/22/12 |