60Printer Setup Load the Media
Load the Media
Use the instructions in this section for loading roll or fanfold media in any print mode.
Caution • While performing any tasks near an open printhead, remove all rings, watches, hanging necklaces, identification badges, or other metallic objects that could touch the printhead. You are not required to turn off the printer power when working near an open printhead, but Zebra recommends it as a precaution. If you turn off the power, you will lose all temporary settings, such as label formats, and you must reload them before you resume printing.
To load media, complete these steps:
1.Raise the media door.
2.Caution • The printhead may be hot and could cause severe burns. Allow the printhead to cool.
Rotate the
1
2
8/22/12 |