Zebra Technologies ZT210, ZT220, ZT230 SETTINGS Menu

20Introduction

ZT230 Printer Control Panel Display

SETTINGS Menu

Items in this menu are shown in the order in which they appear when you press the RIGHT ARROW. For more information about these settings, see Print Settings on page 79.

▼	DARKNESS	▲
	10
▼	PRINT SPEED	▲
	4.0

Adjust the Print Darkness

Set the darkness to the lowest setting that provides good print quality. If you set the darkness too high, the label image may print unclearly, bar codes may not scan correctly, the ribbon may burn through, or the printhead may wear prematurely.

See Print Darkness on page 79 for more information.

Select the Print Speed

Select the speed for printing a label (given in inches per second). Slower print speeds typically yield better print quality.

See Print Speed on page 79 for more information.

			Set the Media Type
			Select the type of media that you are using.
▼	MEDIA TYPE	▲	See Media Type on page 79 for more information.
	GAP/NOTCH

			Select the Print Method
			Specify if the printer is to use Direct Thermal mode (no ribbon) or
▼	PRINT METHOD	▲	Thermal Transfer mode (using thermal transfer media and ribbon).
	THERMAL TRANS		See Print Method on page 80 for more information.

P1048261-004 8/22/12