22Introduction

ZT230 Printer Control Panel Display

SETTINGS Menu (continued)

Items in this menu are shown in the order in which they appear when you press the RIGHT ARROW. For more information about these settings, see Table 7, Print Settings on page 79.

▼

REPRINT MODE

▲

OFF

 

 

 

 

 

 

 

 

 

▼

LABEL LENGTH MAX

▲

39

 

 

 

 

 

 

 

 

 

▼

LANGUAGE

▲

ENGLISH

 

 

 

 

 

 

Set the Reprint Mode

When reprint mode is enabled, you can reprint the last label printed either by issuing certain commands or by pressing the LEFT ARROW on the control panel.

See Reprint Mode on page 82 for more information.

Set the Maximum Label Length

Set the maximum label length to a value that is at least 1.0 in. (25.4 mm) greater than the actual label length plus the interlabel gap. If you set the value to one that is smaller than the label length, the printer assumes that continuous media is loaded, and the printer cannot calibrate.

See Maximum Label Length on page 82 for more information.

Select the Display Language

If necessary, change the language that the printer displays. See Language on page 92 for more information.

Note • The selections for this parameter are displayed in the actual languages to make it easier for you to find one that you are able to read.

P1048261-004

8/22/12