Printer Configuration and Adjustment 99

Calibrate the Ribbon and Media Sensors

The printer does the following:

•The STATUS light and SUPPLIES light flash yellow once.

•The PAUSE light blinks yellow.

•The control panel (ZT230 printer only) displays:

MEDIA/RIBBON CAL

LOAD BACKING

REMOVE RIBBON

2.Caution • The printhead may be hot and could cause severe burns. Allow the printhead to cool.

Rotate the printhead-open lever (1) counterclockwise to release the print mechanism (2).

1

2

3.Extend the media approximately 8 in. (203 mm) out of the printer.

8/22/12

P1048261-004