26Introduction
ZT230 Printer Control Panel Display
TOOLS Menu (continued)
Items in this menu are shown in the order in which they appear when you press the RIGHT ARROW. For more information about these settings, see Table 8, Calibration and Diagnostic Tools on page 83.
ZBI ENABLED?
NO
Is ZBI Enabled?
This menu item indicates if the Zebra Basic Interpreter (ZBI 2.0™) option is enabled on your printer. If you would like to purchase this option, contact your Zebra reseller for more information.
See Enable ZBI on page 88 for more information.
RUN ZBI PROGRAM
▼ (*NONE*) ▲
RUN
Run a ZBI Program*
If ZBI programs exist on your printer, they are listed. If no program exists, NONE is listed.
If you wish to run a ZBI program that you have downloaded to your printer, select it from this menu, and then press
RIGHT SELECT to select RUN. If no program exists, the RUN option does not perform an action.
See Run a ZBI Program on page 88 for more information.
*This menu item appears only if ZBI is enabled on your printer and no ZBI program is running.
STOP ZBI PROGRAM
▼ (*NONE*) ▲
STOP
Stop a ZBI Program*
If a ZBI program is running, the printer lists it. If you wish to stop the program, press RIGHT SELECT to select STOP.
See Stop a ZBI Program on page 88 for more information.
*This menu item appears only if ZBI is enabled on your printer and a ZBI program is running.
8/22/12 |