114Routine Maintenance
Cleaning Schedule and Procedures
4.Using the swab from a Zebra Preventive Maintenance Kit, wipe along the brown strip on the printhead assembly from end to end. In place of the Preventive Maintenance Kit, you may use a clean swab dipped in a solution of isopropyl alcohol (minimum 90%) and deionized water (maximum 10%). Allow the solvent to evaporate.
5.While manually rotating the platen roller, clean it thoroughly with the swab. Allow the solvent to evaporate.
6.Reload the ribbon (if used) and the media. For instructions, see Load the Ribbon on page 55 or Load the Media on page 60.
8/22/12 |