Zebra Technologies ZT210, ZT220, ZT230 manual 93

		Printer Configuration and Adjustment	93
		Changing Printer Settings
	Table 10 • Language Settings (Continued)
Command	Set the Format Command Prefix Value
Character	The format command prefix is a two-digit hex value used as a parameter place marker in
	ZPL/ZPL II format instructions. The printer looks for this hex character to indicate the start
	of a ZPL/ZPL II format instruction.
	Set the format command character to match what is used in your label formats.
	Important • You cannot use the same hex value for the format command prefix,
	control character, and delimiter characters. The printer must see different characters
	to work properly. If you are setting the value through the control panel, the printer
	will skip any value that is already in use.
	Accepted values:	00 to FF
	Related ZPL command(s):	^CC or ~CC
	SGD command used:	zpl.caret
	Control panel menu item:	COMMAND CHAR on page 32
	Printer web page:	View and Modify Printer Settings > ZPL Control
Control	Set the Control Prefix Character Value
Character	The printer looks for this two-digit hex character to indicate the start of a ZPL/ZPL II
	control instruction.
	Set the control prefix character to match what is used in your label formats.
	Accepted values:	00 to FF
	Related ZPL command(s):	^CT or ~CT
	SGD command used:	zpl.control_character
	Control panel menu item:	CONTROL CHAR on page 32
	Printer web page:	View and Modify Printer Settings > ZPL Control
Delimiter	Set the Delimiter Character Value
Character	The delimiter character is a two-digit hex value used as a parameter place marker in
	ZPL/ZPL II format instructions.
	Set the delimiter character to match what is used in your label formats.
	Accepted values:	00 to FF
	Related ZPL command(s):	^CD or ~CD
	SGD command used:	zpl.delimiter
	Control panel menu item:	DELIMITER CHAR on page 33
	Printer web page:	View and Modify Printer Settings > ZPL Control

8/22/12 P1048261-004