Chapter 7 Wireless LAN
The following table describes the labels in this screen.
Table 27 Network Setting > Wireless > Scheduling
LABEL | DESCRIPTION |
Wireless LAN | Select Enable or Disable to activate or deactivate wireless LAN scheduling on your |
Scheduling | |
|
|
State | Select On or Off to enable or disable the wireless LAN. |
|
|
Day | Check the day(s) you want to turn the wireless LAN on or off. |
|
|
Time | Specify a time frame during which the schedule would apply. |
Format) | For example, if you set the time range from 12:00 to 23:00, the wireless LAN will be |
| |
| turned on only during this time period. |
|
|
Apply | Click this to save your changes. |
|
|
Cancel | Click this to restore your previously saved settings. |
|
|
7.9 The Advanced Screen
Use this screen to configure advanced wireless settings. Click Network Setting > Wireless > Advanced, the screen appears as shown.
See Section 7.10.2 on page 104 for detailed definitions of the terms listed in this screen.
Figure 39 Network Setting > Wireless> Advanced
The following table describes the labels in this screen.
Table 28 Network Setting > Wireless> Advanced
LABEL | DESCRIPTION |
Fragmentation | This is the maximum data fragment size that can be sent. Enter a value between 256 and |
Threshold | 2346. |
|
|
Output Power | Set the output power of the |
| area, decrease the output power to reduce interference with other APs. Select one of the |
| following: 100%, 75%, 50% or 25%. |
|
|
Preamble | Select a preamble type from the |
| the Appendix D on page 268 for more information. |
|
|
| 101 |
|
|