Chapter 25 Remote Management

Figure 128 Maintenance > RemoteMGMT > SSH

The following table describes the labels in this screen.

Table 95 Maintenance > RemoteMGMT > SSH

LABEL

DESCRIPTION

Server Port

This displays the service port number for accessing the AMG1312-T Series. If the number

 

is grayed out, it is not editable.

 

 

Server Access

Select the interface(s) through which a computer may access the AMG1312-T Series

 

using this service.

 

Note: It is recommended if you are allowing WAN access even temporarily to change the

 

default password (in Maintenance > User Account). To allow access from the

 

WAN, you will need to configure a WAN to Router firewall rule. See Firewall Section

 

on page 168 for information on configuring firewall rules.

 

 

Secured Client IP

A secured client is a “trusted” computer that is allowed to communicate with the

Address

AMG1312-T Series using this service.

 

Select All to allow any computer to access the AMG1312-T Series using this service.

 

Choose Range to just allow the computer(s) with an IP address in the range that you

 

specify to access the AMG1312-T Series using this service.

 

 

Apply

Click this to save your changes.

 

 

Cancel

Click this to restore your previously saved settings.

 

 

25.8.1 SSH Example

This section shows an example using a graphical interface SSH client program to remotely access the ZyXEL Device. The configuration and connection steps are similar for most SSH client programs. Refer to your SSH client program user’s guide.

1Enter the IP address and port number. Select SSH.

 

219

AMG1312-T Series User’s Guide