Chapter 10 Quality of Service (QoS)

Table 47 QoS > Class Setup Add/Edit (continued)

LABEL

DESCRIPTION

Type Of

Select a type of service to re-assign the priority level to matched traffic.

Service Mark

Available options are: Normal service, Minimize delay, Maximize throughput,

 

 

Maximize reliability and Minimize monetary cost.

 

 

DSCP

This field is available only when you select IP in the Ether Type field.

Mark(0~63)

If you select Mark, enter a DSCP value with which the AMG1312-T Series replaces the

 

 

DSCP field in the packets.

 

If you select Unchange, the AMG1312-T Series keep the DSCP field in the packets.

 

 

802.1Q Tag

If you select Remark, select a priority level (in the Ethernet Priority field) and enter a

 

VLAN ID number (in the VLAN ID field) with which the AMG1312-T Series replaces the

 

IEEE 802.1p priority field and VLAN ID of the frames.

 

If you select Remove, the AMG1312-T Series deletes the VLAN ID of the frames before

 

forwarding them out.

 

If you select Add, the AMG1312-T Series treat all matched traffic untagged and add a

 

second priority level and VLAN ID that you specify in the Ethernet Priority and VLAN

 

ID fields.

 

If you select Same, the AMG1312-T Series keep the Ethernet Priority and VLAN ID in the

 

packets.

 

To configure the Ethernet Priority, you can either select a priority number in the first

 

drop-down list box (7 is the highest and 0 is the lowest priority) or select an application

 

from the second drop-down list box which automatically maps to the corresponding

 

priority number. (Key Net Traffic: 7; Voice: 6; Video: 5;IGMP: 4; Key Data: 3)

 

 

OK

Click OK to save your changes.

 

 

Cancel

Click Cancel to exit this screen without saving.

 

 

10.5 The QoS Game List Screen

Use this screen to give priority to traffic for specific games. Click Network Setting > QoS > Game List to open the screen as shown next.

Figure 68 Network Setting > QoS > Game List

144

 

AMG1312-T Series User’s Guide