Chapter 3 Internet / Wireless Setup Wizard

Figure 12 Internet Connection with PPPoE

The following table describes the fields in this screen.

Table 6 Internet Connection with PPPoE

LABEL

DESCRIPTION

User Name

Enter the user name exactly as your ISP assigned. If assigned a name in the form

 

user@domain where domain identifies a service name, then enter both components

 

exactly as given.

 

 

Password

Enter the password associated with the user name above.

 

 

Multiplex

Select the multiplexing method used by your ISP from the Multiplex drop-down list

 

box either VC-based or LLC-based.

 

 

VPI

Enter the Virtual Path Identifier (VPI) assigned to you. This field may already be

 

configured.

 

 

VCI

Enter the Virtual Channel Identifier (VCI) assigned to you. This field may already be

 

configured.

 

 

Select Yes to enter specific IP information from your Internet service provider. Enter your Internet access information exactly as your service provider gave it to you.

IP Address

Enter the IP address of the AMG1312-T Series.

 

 

Primary DNS

Enter the primary DNS server IP address for the AMG1312-T Series.

Server

 

 

 

Secondary

Enter the secondary DNS server IP address for the AMG1312-T Series.

DNS Server

 

 

 

Back

Click this to return to the previous screen without saving.

 

 

Apply

Click this to save your changes.

 

 

Exit

Click this to close the wizard screen without saving.

 

 

•If the user name and/or password you entered for PPPoE or PPPoA connection are not correct, you are prompted to enter the correct information.

•If the Internet connection fails, check to see if your account is activated.

 

31

AMG1312-T Series User’s Guide