|
|
| Chapter 14 Filters |
|
|
| |
| Table 63 Security > Filter > IPv6/MAC Filter (continued) | ||
| LABEL | DESCRIPTION | |
| Destination Prefix Length | Enter the prefix length for the destination IPv6 address. | |
|
|
| |
| ICMPv6 Type | Select the ICMPv6 message type to filter. The following message types can be | |
|
| selected: | |
|
| 1 / Destination Unreachable: 0 - no route to destination; 1 - | |
|
| communication with destination administratively prohibited; 3 - address | |
|
| unreachable; 4 - port unreachable | |
|
| 2 / Packet Too Big | |
|
| 3 / Time Exceeded: 0 - hop limit exceeded in transit; 1 - fragment | |
|
| reassembly time exceeded | |
|
| 4 / Parameter Problem: 0 - erroneous header field encountered; 1 - | |
|
| unrecognized Next Header type encountered; 2 - unrecognized IPv6 option | |
|
| encountered | |
|
| 128 | / Echo Request |
|
| 129 / Echo Response | |
|
| 130 | / Listener Query - Multicast listener query |
|
| 131 | / Listener Report - Multicast listener report |
|
| 132 | / Listener Done - Multicast listener done |
|
| 143 | / Listener Report v2 - Multicast listener report v2 |
|
| 133 | / Router Solicitation |
|
| 134 | / Router Advertisement |
|
| 135 | / Neighbor Solicitation |
|
| 136 | / Neighbor Advertisement |
|
| 137 | / Redirect - Redirect message |
|
|
| |
| Protocol | This is the (upper layer) protocol that defines the service to which this rule | |
|
| applies. By default it is ICMPv6. | |
|
|
|
|
| IPv6 / MAC Filter Listing |
|
|
|
|
| |
| IPv6 / MAC Filter Rule Index | Select the index number of the filter set from the | |
|
|
| |
| # | This is the index number of the rule in a filter set. | |
|
|
| |
| Active | This field shows whether the rule is activated. | |
|
|
| |
| Interface | This is the interface that the rule applies to. | |
|
|
| |
| Direction | The filter set applies to this traffic direction. | |
|
|
| |
| ICMPv6 Type | The ICMPv6 message type to filter. | |
|
|
| |
| Src IP/PrefixLength | This displays the source IPv6 address and prefix length. | |
|
|
| |
| Dest IP/PrefixLength | This displays the destination IPv6 address and prefix length. | |
|
|
| |
| Mac Address | This is the MAC address of the packets being filtered. | |
|
|
| |
| Protocol | This is the (upper layer) protocol that defines the service to which this rule | |
|
| applies. By default it is ICMPv6. | |
|
|
| |
| Apply | Click this to apply your changes. | |
|
|
| |
| Delete | Click this to remove the filter rule. | |
|
|
| |
| Cancel | Click this to restore your previously saved settings. | |
|
|
|
|
| 167 |
|
|