Chapter 7 Wireless LAN

Table 24 Network Setting > Wireless > WPS (continued)

LABEL

DESCRIPTION

Add a new device with WPS Method

 

 

Method 1 PBC

Use this section to set up a WPS wireless network using Push Button Configuration

 

(PBC).

 

 

WPS

Click this button to add another WPS-enabled wireless device (within wireless range of

 

the AMG1312-T Series) to your wireless network. This button may either be a physical

 

button on the outside of device, or a menu button similar to the WPS button on this

 

screen.

 

Note: You must press the other wireless device’s WPS button within two minutes of

 

pressing this button.

 

 

Method 2 PIN

Use this section to set up a WPS wireless network by entering the PIN of the client into

 

the AMG1312-T Series.

 

 

Register

Enter the PIN of the device that you are setting up a WPS connection with and click

 

Register to authenticate and add the wireless device to your wireless network.

 

You can find the PIN either on the outside of the device, or by checking the device’s

 

settings.

 

Note: You must also activate WPS on that device within two minutes to have it present its

 

PIN to the AMG1312-T Series.

 

 

WPS Configuration Summary

 

 

AP PIN

The PIN (Personal Identification Number) of the AMG1312-T Series is shown here. Enter

 

this PIN in the configuration utility of the device you want to connect to using WPS.

 

The PIN is not necessary when you use WPS push-button method.

 

Click the Generate New PIN button to have the AMG1312-T Series create a new PIN.

 

 

Status

This displays Configured when the AMG1312-T Series has connected to a wireless

 

network using WPS or Enable WPS is selected and wireless or wireless security settings

 

have been changed. The current wireless and wireless security settings also appear in

 

the screen.

 

This displays Unconfigured if WPS is disabled and there is no wireless or wireless

 

security changes on the AMG1312-T Series or you click Release to remove the

 

configured wireless and wireless security settings.

 

 

Release

The default WPS status is Configured.

Configuration

Click this button to remove all configured wireless and wireless security settings for WPS

 

 

connections on the AMG1312-T Series.

 

 

802.11 Mode

This field displays the AMG1312-T Series’s wireless mode that only allows the compliant

 

WLAN devices to associate with it.

 

 

SSID

This field displays the SSID the AMG1312-T Series is currently using.

 

 

Security

This field displays the security mode the AMG1312-T Series is currently using.

 

 

Pre-Shared Key

This field displays the pre-shared key the AMG1312-T Series uses when the security

 

mode is set to WPA(2)-PSK.

 

 

Apply

Click this to save your changes.

 

 

Cancel

Click this to restore your previously saved settings.

 

 

98

 

AMG1312-T Series User’s Guide