Chapter 3 Internet / Wireless Setup Wizard

Enter your Internet access information in the wizard screen exactly as your service provider gave it to you. Leave the defaults in any fields for which you were not given information.

4Configure the field and click Next to continue. See Section 3.2 on page 27 for wireless connection wizard setup.

Figure 9 Internet Access Wizard Setup: IPoA Configuration

The following table describes the fields in this screen.

Table 3 Internet Access Wizard Setup: IPoA Configuration

LABEL

DESCRIPTION

Encapsulation

Select the encapsulation type your ISP uses from the Encapsulation drop-down list

 

box: IPoA, ENET ENCAP, PPPoA, or PPPoE.

 

 

Multiplex

Select the multiplexing method used by your ISP from the Multiplex drop-down list box

 

either VC-based or LLC-based.

 

 

VPI

Enter the Virtual Path Identifier (VPI) assigned to you. This field may already be

 

configured.

 

 

VCI

Enter the Virtual Channel Identifier (VCI) assigned to you. This field may already be

 

configured.

 

 

IP Address

Enter the IP address of the AMG1312-T Series.

 

 

Default Gateway

Enter the default gateway of the ZyXEL Device.

 

 

Primary DNS

Enter the primary DNS server IP address for the AMG1312-T Series.

Server

 

 

 

Secondary DNS

Enter the secondary DNS server IP address for the AMG1312-T Series.

Server

 

 

 

Back

Click this to return to the previous screen without saving.

 

 

Next

Click this to continue to the next wizard screen. The next wizard screen you see depends

 

on what protocol you chose above.

 

 

Exit

Click this to close the wizard screen without saving.

 

 

28

 

AMG1312-T Series User’s Guide