|
| Chapter 14 Filters |
|
|
|
| Table 62 Security > Filter > IP/MAC Filter (continued) | |
| LABEL | DESCRIPTION |
| Subnet Mask | Enter the IP subnet mask for the destination IP address. |
|
|
|
| Port Number | Enter the destination port of the packets that you wish to filter. The range of |
|
| this field is 0 to 65535. This field is ignored if it is 0. |
|
|
|
| Protocol | Select ICMP, TCP or UDP for the upper layer protocol. |
|
|
|
| IP / MAC Filter Listing |
|
|
|
|
| IP / MAC Filter Rule Index | Select the index number of the filter set from the |
|
|
|
| # | This is the index number of the rule in a filter set. |
|
|
|
| Active | This field shows whether the rule is activated. |
|
|
|
| Interface | This is the interface that the filter set applies to. |
|
|
|
| Direction | The filter set applies to this traffic direction. |
|
|
|
| Src IP/Mask | This is the source IP address and subnet mask when you select IP as the rule |
|
| type. |
|
|
|
| Dest IP/Mask | This is the destination IP address and subnet mask. |
|
|
|
| Mac Address | This is the MAC address of the packets being filtered. |
|
|
|
| Src Port | This is the source port number. |
|
|
|
| Dest Port | This is the destination port number. |
|
|
|
| Protocol | This is the upper layer protocol. |
|
|
|
| Apply | Click this to apply your changes. |
|
|
|
| Delete | Click this to remove the filter rule. |
|
|
|
| Cancel | Click this to restore your previously saved settings. |
|
|
|
| 165 |
|
|