Chapter 25 Remote Management

packet from being sent. This keeps outsiders from discovering your AMG1312-T Series when unsupported ports are probed.

Note: If you want your device to respond to pings and requests for unauthorized services, you will also need to configure the firewall accordingly by disabling SPI.

Figure 127 Maintenance > RemoteMGMT > ICMP

The following table describes the labels in this screen.

Table 94 Maintenance > RemoteMGMT > ICMP

LABEL

DESCRIPTION

Respond to Ping on

The AMG1312-T Series will not respond to any incoming Ping requests when Disable is

 

selected. Select LAN to reply to incoming LAN Ping requests. Select WAN to reply to

 

incoming WAN Ping requests. Otherwise select LAN & WAN to reply to both incoming

 

LAN and WAN Ping requests.

 

 

Secured Client IP

A secured client is a “trusted” computer that is allowed to send Ping requests to the

Address

AMG1312-T Series.

 

Select All to allow any computer to send Ping requests to the AMG1312-T Series.

 

Choose Range to just allow the computer(s) with an IP address in the range that you

 

specify to send Ping requests to the AMG1312-T Series.

 

 

Apply

Click this to save your changes.

 

 

Cancel

Click this to restore your previously saved settings.

 

 

25.8 The SSH Screen

You can use Secure SHell (SSH) to securely access the AMG1312-T Series’s command line interface. Specify which interfaces allow SSH access and from which IP address the access can come. SSH is a secure communication protocol that combines authentication and data encryption to provide secure encrypted communication between two hosts over an unsecured network.

Click Maintenance > RemoteMGMT > SSH tab to display the screen as shown.

218

 

AMG1312-T Series User’s Guide