Chapter 21 TR-069 Client

Figure 109 Maintenance > TR-069 Client

The following table describes the fields in this screen.

Table 84 Maintenance > TR-069 Client

LINK

DESCRIPTION

CWMP

Select Enable to allow the AMG1312-T Series to be managed by a management server or

 

select Disable to not allow the AMG1312-T Series to be managed by a management server.

 

 

ACS URL

Type the IP address or domain name of the management server. If the AMG1312-T Series is

 

behind a NAT router that assigns it a private IP address, you will have to configure a NAT

 

port forwarding rule on the NAT router.

 

 

ACS User Name

The user name is used to authenticate the AMG1312-T Series when making a connection to

 

the management server. This user name on the management server and the AMG1312-T

 

Series must be the same. Type a user name of up to 255 printable characters found on an

 

English-language keyboard. Spaces and characters such as @#$%^&*()_+ are allowed.

 

 

ACS Password

The password is used to authenticate the AMG1312-T Series when making a connection to

 

the management server. This password on the management server and the AMG1312-T

 

Series must be the same. Type a password of up to 255 printable characters found on an

 

English-language keyboard.

 

 

Connection

Type the IP address or domain name of the AMG1312-T Series. The management server

Request Path

uses this path to verify the AMG1312-T Series.

 

 

Connection

The default port for access to the AMG1312-T Series from the management server is port

Request Port

7547. If you change it, make sure it does not conflict with another port on your network and

 

it is recommended to use a port number above 1024 (not a commonly used port). The

 

management server should use this port to connect to the AMG1312-T Series. You may

 

need to alter your NAT port forwarding rules if they were already configured.

 

 

Connection

The user name is used to authenticate the management server when connecting to the

Request

AMG1312-T Series. Type a user name of up to 255 printable characters found on an English-

UserName

language keyboard. Spaces and characters such as @#$%^&*()_+ are allowed.

 

 

Connection

The password is used to authenticate the management server when connecting to the

Request

AMG1312-T Series. Type a password of up to 255 printable characters found on an English-

Password

language keyboard. Spaces are not allowed.

 

 

Inform

Select Enable to have the AMG1312-T Series periodically send information to the

 

management server (recommended if CWMP is enabled) or select Disable to not have the

 

AMG1312-T Series periodically send information to the management server

 

 

Inform Interval

The interval is the duration in seconds for which the AMG1312-T Series must attempt to

 

connect with the management server to send information and check for configuration

 

updates. Enter a value between 1 and 86400 seconds.

 

 

Apply

Click this to save your changes.

 

 

Cancel

Click this to restore your previously saved settings.

 

 

 

201

AMG1312-T Series User’s Guide