ZyXEL Communications 2 32

Chapter 3 Internet / Wireless Setup Wizard

After you configure the Internet access information, use the following screen to set up your wireless LAN.

5Check the Wireless Service box to enable wireless connection on the ZyXEL device.

6Configure your wireless settings in this screen. Click Next. Figure 13 Wireless Setup

The following table describes the labels in this screen.

Table 7 Wireless Setup

	LABEL	DESCRIPTION
	Wireless	Click this to enable or disable wireless service on the ZyXEL device.
	Service

	Wireless	Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the wireless LAN.
	Network	If you change this field on the AMG1312-T Series, make sure all wireless stations use the
	Name(SSID)
	Name(SSID)	same SSID in order to access the network.
		same SSID in order to access the network.

	Channel	The range of radio frequencies used by IEEE 802.11b/g wireless devices is called a channel.
	Selection	Select a channel ID that is not already in use by a neighboring device.

	Security	Displays the security setting. To mofidy, see Section 7.2 on page 88.

	Pre-Shared	Enter a set of characters (8 to 63 characters or 64 hexadecimal digits [a-f, A-F, and 0-9]) for
	Key	the shared security key.

	Back	Click this to return to the previous screen without saving.

	Next	Click this to continue to the next wizard screen.

	Exit	Click this to close the wizard screen without saving.

Note: The wireless stations and AMG1312-T Series must use the same SSID and channel ID for wireless communication.

7The configuration settings are saved and applied. Click Close to complete the Internet / Wireless setup.