Chapter 7 Wireless LAN

7.5 The WPS Screen

Use this screen to configure WiFi Protected Setup (WPS) on your AMG1312-T Series.

WPS allows you to quickly set up a wireless network with strong security, without having to configure security settings manually. Set up each WPS connection between two devices. Both devices must support WPS. See Section 7.10.8.3 on page 110 for more information about WPS.

Note: The AMG1312-T Series applies the security settings screen (see Section 7.2 on page 88). If you want to sure you have set the security mode to WPA-PSK,

configured in the General use the WPS feature, make WPA2-PSKor No Security.

Click Network Setting > Wireless > WPS. The following screen displays. Select Enable and click Apply to activate the WPS function. Then you can configure the WPS settings in this screen.

Figure 35 Network Setting > Wireless > WPS

The following table describes the labels in this screen.

Table 24 Network Setting > Wireless > WPS

LABEL

DESCRIPTION

General

 

 

 

WPS

Select Enable to activate WPS on the AMG1312-T Series. Otherwise, select Disable to

 

deactivate WPS.

 

 

 

97

AMG1312-T Series User’s Guide