Chapter 4 Tutorials

IPv6

 

IPv6

 

 

IPv6

 

 

 

 

 

 

 

 

 

 

 

In the Network Setting > Broadband screen’s IPv6 Address configuration section, select Obtain an IP Address Automatically. In the DHCP IPv6 field select DHCP to obtain an IPv6 address from a DHCPv6 server. In the DHCP PD field select Enable to have the AMG1312-T Series pass the WAN prefix to LAN hosts. The LAN hosts can then use the prefix to generate their IPv6 addresses.

4.4 Setting Up a Secure Wireless Network

Thomas wants to set up a wireless network so that he can use his notebook to access the Internet. In this wireless network, the AMG1312-T Series serves as an access point (AP), and the notebook is the wireless client. The wireless client can access the Internet through the AP.

Thomas has to configure the wireless network settings on the AMG1312-T Series. Then he can set up a wireless network using WPS (Section 4.4.2 on page 38) or manual configuration (Section 4.4.3 on page 42).

4.4.1 Configuring the Wireless Network Settings

This example uses the following parameters to set up a wireless network. In the client, choose the AP with the SSID configured here. When prompted for a key, use the Pre-Shared Key configured here.

SSID

SecureWirelessNetwork

 

 

Security Mode

WPA2-PSK

 

 

Pre-Shared Key

DoNotStealMyWirelessNetwork

 

 

802.11 Mode

802.11b+g+n

 

 

 

37

AMG1312-T Series User’s Guide