Chapter 25 Remote Management
Figure 125 Maintenance > RemoteMGMT > SNMP
The following table describes the labels in this screen.
Table 92 Maintenance > RemoteMGMT > SNMP
LABEL | DESCRIPTION |
Server Port | This displays the port the SNMP agent listens on. If the number is grayed out, it is not |
| editable. |
|
|
Server Access | Select the interface(s) through which a computer may access the |
| using this service. |
|
|
Secured Client IP | A secured client is a “trusted” computer that is allowed to access the SNMP agent on the |
Address | |
| Select All to allow any computer to access the SNMP agent. |
| Choose Range to just allow the computer(s) with an IP address in the range that you |
| specify to access the |
|
|
Get Community | Enter the Get Community, which is the password for the incoming Get and GetNext |
| requests from the management station. The default is public and allows all requests. |
|
|
Set Community | Enter the Set community, which is the password for incoming Set requests from the |
| management station. The default is public and allows all requests. |
|
|
Apply | Click Apply to save your changes back to the |
|
|
Cancel | Click Cancel to begin configuring this screen afresh. |
|
|
216 |
|
|
|