|
| Chapter 6 Broadband |
|
|
|
| Table 11 Network Setting > Broadband > Internet Connection (continued) | |
| LABEL | DESCRIPTION |
| WAN Identifier | If you selected Manual, enter the WAN Identifier in this field. The WAN identifier |
|
| should be unique and 64 bits in hexadecimal form. Every 16 bit block should be |
|
| separated by a colon as in XXXX:XXXX:XXXX:XXXX where X is a hexadecimal |
|
| character. Blocks of zeros can be represented with double colons as in |
|
| XXXX:XXXX::XXXX. |
|
|
|
| Bridge and Routing mode in the same WAN (ENET ENCAP and PPPoE encapsulation only) | |
| This feature allows you to set some LAN port(s) and/or SSID(s) to be in bridge mode with the WAN interface, | |
| while other LAN port(s) and SSID(s) can still use Firewall, DHCP server and NAT on the | |
|
|
|
| Enable | Select this option to bridge traffic between the WAN interface and certain Ethernet |
| WAN | port(s) and/or SSID(s). Other ports and SSIDs will be still in router mode with the |
|
| WAN interface. |
|
| Note: The port binding feature will be disabled automatically when you select this |
|
| option. |
|
|
|
| Connection (PPPoA and PPPoE encapsulation only) | |
|
|
|
| Keep Alive | Select Keep Alive when you want your connection up all the time. The |
|
| Series will try to bring up the connection automatically if it is disconnected. |
|
| Note: Do not specify an |
|
| |
|
| concern. |
|
|
|
| Connect on Demand | Select Connect on Demand when you don't want the connection up all the time and |
|
| specify an idle |
|
|
|
| Apply | Click this to save your changes. |
|
|
|
| Cancel | Click this to restore your previously saved settings. |
|
|
|
| Advanced Setup | Click this to display the Advanced WAN Setup screen and edit more details of your |
|
| WAN setup. Click this button again to display less fields in this screen. |
|
|
|
6.2.1 Advanced Setup
Use this screen to edit your
| 73 |
|
|