Chapter 4 Tutorials
Configured WAN connections can be viewed by clicking the More Connections tab under Network Setting > Broadband. See the WAN Setup chapter (Chapter 6 on page 68) for more information on configuring WAN connections and ATM QoS settings.
4.9.2 Configuring Port Binding
You can then group specific WAN PVCs with LAN ports or WLANs, so traffic from these ports is forwarded through specific WAN PVCs. In the configuration shown below, the WAN connections set up in the previous section are bound as follows:
Table 9 Port Binding Groups
GROUP INDEX | WAN CONNECTION | LAN PORT |
0 | PVC0 - for Data | eth1, eth2, AP0 |
|
|
|
1 | PVC1 - for VoIP | eth3 |
|
|
|
2 | PVC2 - for MOD | eth4 |
|
|
|
1Access the port binding screen by clicking Network Setting > Port Binding, and select Activated Port Binding to turn on the port binding feature.
2Click the Port Binding tab, specify the Group Index and select the ports to include in the port binding group. Click Apply.
| 55 |
|
|