Chapter 8 Home Networking

Figure 48 Network Setting > Home Networking > LAN Setup

The following table describes the fields in this screen.

Table 31 Network Setting > Home Networking > LAN Setup

LABEL

DESCRIPTION

LAN IP Setup

 

 

 

IP Address

Enter the LAN IP address you want to assign to your AMG1312-T Series in dotted

 

decimal notation, for example, 192.168.1.1 (factory default).

 

 

Subnet Mask

Type the subnet mask of your network in dotted decimal notation, for example

 

255.255.255.0 (factory default). Your AMG1312-T Series automatically computes the

 

subnet mask based on the IP Address you enter, so do not change this field unless you

 

are instructed to do so.

 

 

Dynamic Route

RIP (Routing Information Protocol) allows a router to exchange routing information

 

 

with other routers. Select the RIP version from RIP1 and RIP2.

 

 

Direction

Use this field to control how much routing information the VDSL Router sends and

 

 

receives on the subnet. Select the RIP Direction from None, Both, IN Only and

 

OUT Only.

 

 

Multicast

IGMP (Internet Group Multicast Protocol) is a network-layer protocol used to establish

 

membership in a multicast group. The AMG1312-T Series supports IGMP v1/IGMP

 

v2/IGMP v3. Select None to disable it.

 

 

IGMP Snooping

Select Enabled to activate IGMP Snooping. This allows the AMG1312-T Series to

 

passively learn memberships in multicast groups. Otherwise, select Disabled to

 

deactivate it.

 

 

DHCP Server State

 

 

 

118

 

AMG1312-T Series User’s Guide